How To Remove A Kitchen Island?

If you’re remodeling your kitchen, you’ll undoubtedly want to get rid of or replace your kitchen island. Kitchen islands are difficult to replace because they are frequently built-in. Removal is possible, but depending on the intricacy and function of your island, it can be a lengthy process. So, how can you get your kitchen island out of the way?

You might be asking whether the big piece can be removed and replaced. Fortunately, relocating or removing a kitchen island is simple. However, the amount of time and money required is dependent on the style of kitchen island you currently have. Let’s discuss this removal process in detail in this post.

Steps To Remove Kitchen Island:

To remove your kitchen island, clear it of all clutter first, then switch off the power and water. Before removing the countertop, make sure you remove all of the moldings and trimmings from your island. The final step would be to deconstruct the island base piece by piece.

1)Remove Drawers And Countertops:

It’s pretty simple to remove your kitchen island if any electricity, gas, or water connections are missing. Remove any drawers or open shelves as the initial stage in the procedure. Nothing will get loose and fall when you move the unit in this manner. This is especially crucial if your island contains breakable or pointy things or fallen items that could harm your kitchen floor.

The next step is to remove the island’s countertop, which may entail unscrewing any screws keeping it in place or prying the countertop away from the unit if it’s glued on. You’ll also need to remove any fasteners if your kitchen island is secured to the floor. However, most islands are not often affixed to the floor.

2)Remove All Screws And Hardware

After loosening the unit, start dismantling it in portions. This operation may necessitate a saw to remove any stubborn supports. After you’ve disassembled the island, you can either discard it or reassemble it in a new location.

Remove all cabinet hardware and place it in a plastic bag labeled to secure it. Screws into wall studs, hinges, drawer tracks, straps for attaching drawers, and anything else that attaches to wood fall into this category.

3)Remove Molding:

Remove any trim or moulding from the kitchen island with a pry bar and claw hammer. When you remove the moulding from the kitchen island, you’ll undoubtedly see where the base meets the countertop, as well as how the walls are connected.

4)Turn Off The Water Supply:

Before dismantling the kitchen island further, turn off the water supply to the sink and the power supply at the main water shut-off valve and the circuit breaker on the main electrical panel. After that, unplug any piping or wiring. If you’re not sure about this, hire a licensed professional to do it for you.

If your island has water hook-ups, turn off the cold and hot water valves, then detach the water lines from the faucet’s bottom. Remove the bolts that hold the island sink in place, then use a wrench to loosen and finally remove the drain fitting. If there is any water left in the lines, it will likely seep out, so have something handy to mop up with. If you want to replace the old island with a new one, you can leave the water pipes in place once the sink is removed.

5)Turn Off Power Supply:

To avoid accidently shocking oneself while working on electrical connections, you must first cut off the electrical circuit and lock the electrical box. The wiring and switches will be disconnected, and the wires will be pulled out of the boxes.

The cables can then be pulled out of the access holes as the island is removed. If you want to construct another kitchen island with electrical connections, you can choose to leave the cables where they are.

6)Cut-Down Island’s Top:

If that makes sense, a nice place to cut the countertop is in the corner where it joins other countertops. Measure how tall you’ll need it to be and make a pencil mark on both sides. Then cut straight through with a circular saw or reciprocating saw, remembering which side is up when putting it back together. If you make any mistakes, use an orbital sander for sanding off what needs to be replaced and repair any holes with glue and wood filler before sanding again.

7)Dismantle Remaining Island Parts:

Remove the countertops first to make the dismantling of the base easier. Ceramic, marble, granite, stone, and other hard and heavy materials frequently used for countertops. As a result, this part takes a lot of muscle force; get some assistance. First and foremost, double-check that your countertop is free of debris. Take a closer look at the island foundation and see where the countertop is joined.

You can now begin dismantling your kitchen island with the tools you used previously. After completing the preceding steps, this work becomes much easier and safer. Cabinet drawers must be removed, and cabinet units must be unscrewed. Remember to take your time and demolish the island piece by piece. Set aside each component as soon as possible to avoid any mishaps or dangers.

Conclusion:

A kitchen island is a terrific way to finish off your kitchen, but be sure the functions are right for you. Both the installation and removal processes should be approached with caution and forethought. Hopefully, this article will help you remove the kitchen island yourself without professional assistance. However, you can surely hire experts for this removal if you have enough budget and time. It’s completely your choice!

Total
0
Shares
Related Posts