How To Mount Tv On Uneven Stone Fireplace

You might wish to set your TV above your heater or wood stove, but the only accessible wall space is an uneven stone fireplace wall. You can still learn how to install a TV wall mount on an uneven brick wall, but you’ll have to spend a little more time preparing. It may require some patience and another set of hands to install a stone wall tv mount that does not have a fireplace, comparable to putting a tv mount to a brick wall.

Stones can have an irregular surface, making it more difficult to mount your television bracket than a flat drywall part. If you don’t handle the television cautiously, you may find yourself in unavoidable situations. But don’t worry; we’ll cover all you need to know about mounting your TV in this article.

Is It Okay To Mount A TV On Uneven Stone Fireplace?

When done correctly, installing your television on an uneven stone fireplace wall is just as safe as mounting it on a plasterboard or drywall surface. However, you may need to conduct some additional prep work to ensure that the mount is flush and stable against the wall at the mounting positions.

This may entail looking for stones that protrude further than the rest and chiseling them down to prevent the TV wall mount from becoming obstructed. The tough aspect is placing your television on an uneven stone wall or fireplace. It’s critical to take your time and be methodical when installing your system.

Steps To Mount A TV On Uneven Stone Fireplace:

Mark The Mounting Point On The Wall:

First and foremost, ensure that the mounting is at the desired location. You can use tape and position it on the surface according to the size of the television. As a result, you’ll have a good sense of the space you’ll need for the mounting.

Then, mark the holes where the anchors will be placed using the mounting bracket. Decide on a mounting location for your TV by taking measurements and evaluating the sort of wall you’re working with. You can mount it on any concrete or stone surface.

If you want to fix the timber framing behind you, you’ll need an electrical sensor to locate the studs.

Use Stud Spacing And Appropriate Framing:

In the case of imitation stone walls, be sure your chosen mounting location aligns with regular wall stud spacing. Plot a hole or drill a hole with the help of a masonry drill. Check the size of the hole after it’s been drilled to see if it fits the diameter of the cement anchor.

Drill a new hole if the first one doesn’t match the cement anchor. It will be tough to drill to the correct capacity but strive to do so.

Mark The Space For Cable:

Make a hole in the wall where your cabling may be snaked through and returned to your power bar or electric access point. Place the cement anchor in the hole using the hammer. Furthermore, apply masonry epoxy to the anchors for more firm support and ensure that they do not fall. This will secure the anchors. Wait until it has completely dry before proceeding.

Install Mounting Brackets:

It’s now time to put the mounting bracket on this. You’ll need the screws to remember the mounting bracket’s size. Before buying the screw, tighten it using the socket wrench. If your television comes with a stand, unfasten the screw from the television.

Now is the time to mount your television. Connect the mount to the television first. Then tighten the bolts into the frame, which is connected to the stone via the already-attached mounting bracket. Finally, hoist the television and connect it to the wall using a mounting bracket. To support the mounting bracket, you can use a clip or slot.

Use A Cable Concealer To Hide Wires:

After installing an electronic item, particularly a television, the biggest issue is that several cable wires connect to it, which will give your room a dusty appearance. But there is a solution: you can get a cable concealer and easily attach all of your wires, which will give you a neat appearance and safeguard you from any hazard. You can even spray-paint it to match the fireplace’s color.

Static Mounts Are Suitable For TV Mounting On Uneven Stone Fireplace:

Consider which mount style would be ideal for your viewing experience when choosing the mount. Although static mounts are the most popular, swivel and articulating mounts, which usually incorporate a swing arm, may provide greater TV viewing.

Following your decision on whatever mount style you choose, another factor to consider is the structural support behind the stone wall. To choose the correct anchor, you must first determine the type of support that exists behind the wall.

Final Thoughts:

This article walks you through the simplest steps for mounting a television on a stone fireplace. But be cautious when installing it, and if you don’t understand what you’re doing, ask someone to assist you. On the uneven stone wall, try to pick the most even area while also having a depth adjuster as a workaround.

Purchasing hanger bolts, along with washers and nuts, would be the simplest way to cope with the uneven stone wall. The nuts can modify the wall mount after installation to make it flatter or even plain.

Total
0
Shares
Related Posts