Do you want to update your kitchen by replacing the outdated cabinets, but you don’t want to replace the countertop? Is it possible to replace kitchen cabinets without replacing the countertop? Yes, you can do that, but you must use caution. It’s difficult to change cabinets without removing the countertop.
You’ll need to get replacement cabinets from hardware stores and carefully remove the previous cabinet beneath the tabletop. The older cabinet can then be replaced. In the interim, use studs to hold the countertop.
Remove the top section of the cabinet with a knife and pull the cabinets cautiously. Now that you’ve seen the fundamentals, it’s time to move on to the detailed instructions.
Is It Possible To Remove Base Cabinets Without Removing Countertops?
Yes, the kitchen cabinet can be replaced without causing damage to the surface. Furthermore, the procedure is simpler than most people believe. Furthermore, DIY kitchen cabinet replacement saves you money by eliminating hiring expert plumbers or woodworkers.
Before removing the base cupboards and cabinet frame, be cautious about providing enough support for the stone or hardwood countertop. Because the countertop is a heavyweight structure, you’ll need to provide enough support so it can withstand the replacement process.
To prevent the countertop from falling off the top and damaging the complete cabinet structure, use studs to hold it properly. That should now be crystal clear to you. It is easy to replace the old kitchen cabinet without removing the countertop with a fresh one.
Steps To Replace Kitchen Base Cabinets Without Removing Countertops:
Collect Required Materials:
- A wood lumbers
- A sharp knife
- Electric drill
- Soldering iron
Use A Table Or Ladder To Support Countertop:
Before removing the countertop, it must be supported in its current location. This step is critical since the countertop will fall if the cabinets are removed. So, to keep it from dropping, you’ll need to prop it up with a stand, a table, or whatever else you can think of to keep the countertop in place.
Unscrew All Installations:
Remove all of the cabinet installation screws from the walls. It’s possible that you won’t be able to remove the cabinets as a whole if they were installed before the flooring. You would have to demolish the boxes if the toe base was integrated into the cabinets rather than separate pieces.
Cutting around the plumbing-Cut the rear of the cabinet with a sabre saw or salsa. The cabinet must glide past the sink. Thus this cut must be large enough.
The sides of the cabinets are simple to remove, but the upper piece of the cabinets attached to the countertop requires more effort. Because these are usually glued together with a powerful adhesive, you’ll need to cut the bonding with a knife or another flat object.
Pull the base cabinets slightly out of the way, and they should come out easily. It will leave a sticky rubber-like residue on the lower base of the countertop after removal. That substance must be scraped with a scraper or other instrument; otherwise, it will cause issues while installing the new kitchen cabinets.
Install New Cabinets:
If you have experienced some moderate flooding or mild water damage, make sure to spray bleach or mildew killer on the walls before installing the new kitchen or bathroom cupboards. If left neglected, water-damaged areas might lead to health issues.
Consult a professional mold removal and restoration business if the walls have been exposed to much water and there is evidence of enough mold.
It’s only a matter of thinking things through to figure out how to install the new cabinets after you’ve removed the old ones. You’ll be removing the props one by one as you replace them with the new cupboards.
If you bought your new cabinets from a Home Depot, you might have to cut a portion of them off. This is usually acceptable because the toe base can be cut to height.
Remove Supporting Object After Installing New Cabinets:
You can install the new kitchen cabinet after you’ve confirmed that the walls are no longer damp. The cabinet walls must be pushed against the previously cut sides near the plumbing locations. After the cabinet has been carefully positioned, the supporting studs beneath the countertop can be removed.
Then, one by one, tighten the screws and check for any gaps in the plumbing locations. You should fill it with a suitable material for durability, such as concrete.
It is possible to replace kitchen cabinets without having to replace the countertop. Providing studs as countertop support, in theory, makes removing the kitchen cabinet a simple and convenient task. It’s just a matter of being patient and thinking things through as you go when removing cabinets without removing the countertop.
Every circumstance will have its own set of challenges. Some conditions may allow you to remove the cabinets in portions, while others require you to dismantle the boxes and remove them individually. The most important thing is to make sure that the countertop in the kitchen or bathroom vanity where you’re working is properly supported.