How To Stop Vibration Through Floor?

floor vibration

Vibrations on the floor are a typical problem that most of us have experienced at some point. Whether it’s the creaking and banging from above or the complaints from those on the level below, both sides of the problem can be aggravating.

While there are various causes for floor vibrations, there are techniques to eliminate or reduce them. Once the source of the vibrations has been identified, the proper solution for resolving the problem can be applied.

People, furniture, and appliances are all supported on wood-framed floors on the first or second story. Nails used instead of wood screws and construction glue to install subfloors might loosen with time in many older homes. As a result, the floor may vibrate when certain forms of movement occur.

Vibrations can be caused by running a washing machine or walking across a floor with loose flooring. By repairing the problematic spots, a qualified do-it-yourself can lessen floor vibrations.

Consider The Floor Vibration At The Time Of Construction:

In most cases, flooring systems in a home are safe and meet building codes. Even if the floor system is adequate, the deflection-induced movement might generate vibrations and other undesirable effects.

Many homeowners are sensitive to floor vibrations caused by frequent foot activity, and this is a subjective idea since what seems fine to one person may irritate another. Squeaks and noises may be mistaken for squeaky floors.

Floor complaints are frequently caused by simple changes in floor usage or joist spans. To minimize issues when building a home from the ground up, the homeowner and contractor should consider floor vibrations when selecting the home’s frame.

Wooden Floors Are More Prone To Vibration:

Due to tiny deflections up and down as the joists are loaded and unloaded, wood-framed floors are the most common source of floor vibrations. For sure, we add the floor to hold humans, furniture, and major appliances; it can vibrate over time due to specific actions.

Wood flooring is fitted using wood screws and construction adhesive in newer construction homes, which can help to stabilize vibrations, and joists help limit these deflections. However, in older homes with nailed-in subfloors, the nails may start to loosen over time. Walking across a floor with a loose subfloor or using an item like the dishwasher can also cause for creating vibration.

Higher Foot Traffic Can Also Create Vibration:

Foot traffic, vibrating machines, and external factors are all known causes of floor vibrations. Walking is the most prevalent cause of floor vibrations, which is viewed as an annoyance more than anything else. Isolating mounts or motion arrest pads can alleviate machine-induced vibrations, like those caused by a running washing machine.

Steps To Stop The Vibration Through The Floor:

Homeowners must identify which areas of the floor require repair. Hiring a contractor or engineer to locate the problem and provide advice on how to solve it is a straightforward approach. Mark these spots to readily identify them if you have a general notion of where the vibrations occur.

1)Determine The Main Issue:

Determine the area of a room that requires floor repair. Hop up and down and listen for the floor to vibrate as you do so. Placing a glass of water on a table and strolling or jumping on the floor is another option. Take measurements from one or more walls and compare them to the area that vibrates the most. If the floor in the laundry room vibrates, skip this step.

2)Use Ladder To Access All The Floors:

Access to the underfloor region where the floor will be fixed is the main thing to consider. To gain access below the first floor, use the crawl space opening or a stepladder to access the ceiling below a second story. Mark the exposed floor joist or ceiling at the loose spot according to your measurements.

For a plaster or drywall ceiling, use a stud finder to locate a joist and indicate the joist’s location and two adjacent joists on each side of it. For a plaster or drywall ceiling, take appropriate measurements.

3)Measure The Distance Between The Joists And Floors:

In the area where you will put the blocks, measure the distance between the floor joists. You have to set the blocks between two joists each way of the specified joist for exposed joists under the first floor. Excitingly! You can install more blocks once you have installed a wider area. Moreover, use the hand saw, or table saw to cut the blocks out of the pressure-treated lumber effortlessly.

4)Install The Cut Blocks:

One by one, place the blocks between the joists. Apply a generous amount of construction adhesive to one of the 2-inch-wide edges of a block that will be in touch with the subfloor’s underside. Place the block between two joists and hammer the bottom edge upward, so the adhesive-coated upper edge is firm against the subfloor’s underside.

Hanger nails in each of the machined holes at the right angle. Moreover, use the connectors to secure each block to the corresponding sides of the floor’s joists.


Even if you are going to build a new floor or building, consider the vibration factor. However, you can also deal with this issue later. But it will require more time and effort. Sometimes you may need to get help even from the professionals to solve this issue.

That’s why it’s better to fix it earlier or at the time of construction. Moreover, you can also follow the discussed steps if your floor suffers from a vibration issue.

Also read: Top tips to help reduce worker’s fatigue at construction sites

Also read: How To Make Tile Floor Less Slippery?

Related Posts